<track id="cjzrz"><span id="cjzrz"></span></track><menuitem id="cjzrz"><dfn id="cjzrz"></dfn></menuitem>
<bdo id="cjzrz"></bdo>
<tbody id="cjzrz"></tbody>

    1. <track id="cjzrz"><div id="cjzrz"></div></track>
      首頁 ->產品展示 >> JWZQ型沉水式(潛水式)閥門試壓機、測試臺

      JWZQ型沉水式(潛水式)閥門試壓機、測試臺

      JWZQ型沉水式(潛水式)閥門試壓機、測試臺

      詳細說明

      產品概述

      JWZQ型沉水式閥門液壓試壓機是我公司在積累多年生產閥門檢測設備技術的基礎上按照國家GB/T1 3927 — 92《通用閥門壓力試驗》和ZBJl6006-90《閥門的試驗與檢測》的標準規范要求,是公司自主研發的新一代沉水式液壓閥門試壓機并擁有國家技術專利知識產權,專利號ZL2014 2 0224020.2本機最大特點是將被測試工件浸入水中,在測試過程中可方便目測測試工作是否有泄漏,本機集機電、液壓、試壓、液體介質貯存循環使用于一體,具有功能完善、性能穩定、自動化程度高等特點。廣泛用于公稱通徑DNl5-600mm的直通式法蘭及螺紋連接各類高、中、低壓閥門的強度、密封和泄漏量等各項性能測試。測試介質:水、氣、油。最高密封試驗壓力 32.0MPa,強度48.0MPa,本設備廣泛用于閥門制造業和石油、石化、核電、化工等使用、閥門維修部門等單位的一先進理想的閥門試壓檢驗設備。

               1. JWZQ沉水式(浸水式)試壓機、試驗機技術性能與特點

                ● 本機最大特點是將被測試工件浸入水中,在測試過程中可方便目測測試工作是否有泄漏,

           可上升和下降,  完全符合GB/T 13927-2008、JB/T 9092-99、API 598要求;
      ● 閥門在試驗過程中兩側工作盤可翻轉90度工作,特別適用氣密性能試驗;
      ● 系統內配置高、低壓水泵供壓裝置,試驗介質循環貯存使用;
      ● 試壓介質為水、氣、煤油,由用戶任意選擇;
      ● 在測試水或氣的保壓過程中,被試閥腔內有較高的壓力情況下按任何一個按鈕都不工作,
          一直泄壓到無壓力才能正常工作。(工作時確保安全);
      ● 本機設有液壓自動卸荷系統,使用時,高壓狀態與卸荷狀態自動切換,有效降低了油溫,
          延長了設備使用壽命,節能降耗;
      ● 設有試壓安全保護裝置;
      ● 可訂配電腦檢測數據管理系統。
       
      Technical performance and feature
      ● The best feature of this machine is: the tested working parts can be soaked into the water. You can see
          by your own eyes whether the test work has leakage during the course of test, it can move upward or downward,
           fully meet the GB/T 13927-2008, JB/T 9092-99, the API 598 requirements.
      ● Left and right two directions clamp worktables set 90 degree overturn function, especially suitable for air-tightness.
      ● The system equips with the high and low pressure water pump device to be used for the test medium circulationstorage.
      ● The pressure trial medium is water, air and kerosene that can be selected freely by users.
      ●During the course of presseure protection of water or air test, any button can not work under the
         condition of which the tested valve cavity has high pressure, it can work nornmally until leaking the pressure
         to no pressure (make sure safety while working).
      ● The test bench is equipped with an automatic oil pressure discharge system. As it is used, a high
          pressure condition and pressure discharge condition can be changed over to effectively reduce the oil temperature,
          elongate life of the test bench and save energy.
      ● It sets the pressure trial safe protective device.
      ● It can match with computer detection data management system.
       
      2.JWZQ型 (潛水式)液壓閥門測試臺(外觀示意圖)
      JWZQ type diving hydraulic valve test bench (outline schematic figure)
      1. 數碼時鐘           2. 壓力表                    3. 壓力表開關
       
      4. 按鈕操作板      5. 水氣控制閥門開關6. 高低壓水泵柜
       
        7. 液壓系統        8. 油箱                         9. 水泵系統
       
      2.1    JWZQ型 (潛水式)液壓閥門測試臺 (工作示意圖)
               JWZQ type diving hydraulic valve test bench (illustration)
       

      3、JWZQ沉水式液壓測試臺公稱壓力試驗范圍圖表對照
       
      3.1   JWZQ-100型(潛水式) 閥門公稱通徑與公稱壓力試驗范圍
              The test range of valve nominal diameter and nominal pressure for JWZ-100 model
       

       

       

      3.2    JWZQ-200型 (潛水式)閥門公稱通徑與公稱壓力試驗范圍
              The test range of valve nominal diameter and nominal pressure for JWZ-200 model

      3.3  JWZQ-300型 (潛水式)閥門公稱通徑與公稱壓力試驗范圍

              The test range of valve nominal diameter and nominal pressure for JWZ-300 model

       

      3.4   JWZQ-400型(潛水式) (特制型)閥門公稱通徑與公稱壓力試驗范圍
              The test range of valve nominal diameter and nominal pressure for JWZ-400 model (handtailor)
       
      3.5  JWZQ-400型 (潛水式) 閥門公稱通徑與公稱壓力試驗范圍
             The test range of valve nominal diameter and nominal pressure for JWZ-400 model
       
       
      3.6 JWZQ-500型 (潛水式) 閥門公稱通徑與公稱壓力試驗范圍
      The test range of valve nominal diameter and nominal pressure for JWZ-500 model
      3.7 JWZQ-600型 (潛水式)閥門公稱通徑與公稱壓力試驗范圍
      The test range of valve nominal diameter and nominal pressure for JWZ-600 model
       

      其它系列閥門試壓檢測設備鏈接:JWT型頂壓閥門試壓機    JLT型立式頂壓閥門試驗機     JWZ型液壓閥門測試臺 

                                                                       JWTQ鍛鋼閥門試壓機      JLD蝶閥試驗臺                        JWM閥瓣閘板研磨機

       

       

      查看更多[ 產品展示 ]產品

      友情鏈接不銹鋼離心泵閥門試壓機閥門試驗機閥門試驗臺
      版權所有 © 2011 浙江優機機械科技有限公司 All Rights Reserved.
      電話:0577-21816666 67953666 傳真:0577-67996922 網站地圖
      特级无码毛片免费视频播放▽
      <track id="cjzrz"><span id="cjzrz"></span></track><menuitem id="cjzrz"><dfn id="cjzrz"></dfn></menuitem>
      <bdo id="cjzrz"></bdo>
      <tbody id="cjzrz"></tbody>

      1. <track id="cjzrz"><div id="cjzrz"></div></track>